In four
different body styles with three different neck designs, Snake Eyes
Tour Platinum putters feature milled surfaces over their 304 soft
stainless steel. The Advanced Roll Control (A.R.C.) milling pattern features
a series of semicircle cuts, or scales, situated in a 44° upward angle. The
width of each scale is 4 mm, compared to the average ball dimple width of 5
mm, so the edges of the scales can catch the ball’s surface regardless of
where they make contact. The result? A quicker overspin with less bouncing
and skidding, leading to a truer roll that stays on line. Each has a rich
black PVD finish with a bead-blasted topline to reduce glare.
Custom assembled to your
specific length. Let me E-mail you a
quote - you will be surprised at the amount of $$$$$$ you will save.
Snake Eyes Tour Platinum Putter
In four
different body styles with three different neck designs, Snake Eyes
Tour Platinum putters feature milled surfaces over their 304 soft
stainless steel. The Advanced Roll Control (A.R.C.) milling pattern features
a series of semicircle cuts, or scales, situated in a 44° upward angle. The
width of each scale is 4 mm, compared to the average ball dimple width of 5
mm, so the edges of the scales can catch the ball’s surface regardless of
where they make contact. The result? A quicker overspin with less bouncing
and skidding, leading to a truer roll that stays on line. Each has a rich
black PVD finish with a bead-blasted topline to reduce glare.